Inflight CT Specifications:
All Inflight Fitness exercise equipment is constructed of heavy-duty 11 and 12ga structural tubing with an ASTM rating of A500 grade (minimum mechanical properties of 58,000 PSI ultimate tensile strength and 46,000 PSI yield strength). All flanges are a minimum of ¼" thick. All steel components are machined to a minimum tolerance of +/- .030".
All MIG (metal inert gas) welding is in accordance with the following codes and/or standards: 3:1 AWS, A3.0 Welding Terms and Definitions 3.2 AWS Dl.1-81 Structural Welding Code-Steel 3.2 AWS D9.1 Specifications. All TIG (tungsten inert gas) welding is in accordance with Mil-Std-2219.
Each piece of equipment is prepared for powder coating with a high-temperature, high-pressure iron phosphate wash to ensure optimum adhesion of the electrostatically applied TGIC polyester powder. The coating is then baked at 375 degrees F and carefully monitored to ensure complete curing. This coating is scuff resistant and long wearing. Technical summaries are determined using 3.0 -5.0 mil powder film over iron-phosphated, pretreated steel using and conforming with the following test methods: ASTM B5965-96, C ASTM D 3451-93, 13 ULDTOV2 organic coatings.
Padding and Upholstery:
All of our selectorized weight equipment is fitted with black vinyl covered HR molded cushions. The molded cushions have a density of 100 and a durometer of 40-45. The back cushions incorporate lumbar support and the bottom cushions are contoured to provide comfort and proper positioning. This material is long lasting and easy to clean.
However, if you need a custom color, custom pads are available. We use a padding material of 2" thick crosslinked polyolefin foam, which has extremely low water absorption, excellent weathering properties, and superior physical properties to neoprene or polyurethane type foams. We cover the pad with your choice of "Naugahyde" or "Boltaflex" vinyl.
All pads are top and blind-stitched. Foam is glued to a 3/4" thick support board, radiused and chamfered for durability.
All pivots rotate on either ABEC-1 precision ball bearings (Load Rating for 1"=2529 pounds), contained in a cast or machined housing or a self-lubricating Oilite bronze bushing in a machined steel housing to provide smooth, quiet movement and precise alignment.
1/4" diameter, 7 x 19 strand, mil-spec aircraft cable with a black nylon coating. All fittings are stainless steel and swaged to the cable. The cable assembly is rated at a minimum breaking strength of 4200 lbs.
Pulleys are 4 1/2" diameter fiberglass-impregnated nylon with a precision fit cable groove and 6203 double sealed roller bearings.
Weight Plates and Dampening:
All Inflight Fitness selectorized equipment feature solid cast steel weight stack plates with a black finish. Self-aligning low friction sleeve bearings surround the guide rods on every weight stack plate. Weight plates are warranted against breakage for the lifetime of the machine. Heavy-duty rubber spacers are used under the weight stack to absorb shock and reduce noise.
To ensure quiet operation and low friction movement, all machines are fitted with 1" diameter floating chrome plated guide rods with rubber cushion plugs on each end.
Lanyard attached pins:
All Inflight Fitness selectorized equipment feature weight stack pins that are attached with a coiled self-storing cord to prevent pin removal or loss.
All bolts meet ANSI B18.3 specifications. One-time use aircraft style center-locking nuts are used to ensure attach points remain secure.
Our handgrips are manufactured from nonabsorbent UV resistant closed cell PVC vinyl foam for comfort, safety and durability.
Commercial Equipment Limited Warranty
Inflight Fitness warrants that all new Inflight Fitness products are free of manufacturing defects in workmanship and materials. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only. This warranty becomes effective at the invoice date of the original purchase.
This is a parts only warranty. Bearings, guide rods, cams, pulleys, cables, handgrips, and miscellaneous parts will be warranted for a period of one year. Frame and weights will be warranted lifetime. Upholstery, foam-molded pads and naugahyde upholstery, will be warranted for 90 days.
This warranty is valid only in accordance with the conditions set forth below.
- Warranty applies to the Inflight Fitness product only while
- it remains in the possession of the original purchaser and proof of purchase is demonstrated
- it has not been subjected to accident, misuse, abuse, improper service, or non-Inflight Fitness modification, and
- claims are made within the warranty period.
- This warranty does not cover damage caused by failure to provide reasonable and necessary maintenance as outlined on placards and in the manuals.
- Inflight Fitness Limited Warranty Service may be obtained by contacting the authorized dealer from whom you purchased the item.
This Limited Warranty shall not apply to:
- Repairs performed on Inflight Fitness equipment missing a serial number or with a serial tag that has been defaced.
- Service calls to correct installation of the equipment or instruct owners on how to use the equipment.
- Pick-up, delivery, or freight charges involved with repairs.
INFLIGHT FITNESS' SOLE LIABILITY IS LIMITED TO REPAIR OR REPLACEMENT OF PARTS ACCORDING TO THE TERMS AND CONDITIONS OF THESE LIMITED WARRANTIES, AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE ABOVE WRITTEN WARRANTIES. IN NO EVENT WILL INFLIGHT FITNESS OR THE SELLING DEALER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SUCH AS INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR DAMAGE TO OTHER PROPERTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.