Valor Fitness Rope Clasp for Converting Battle Rope to Climbing Rope - What is the best way to convert your heavy rope into a climbing rope? The BR-Clasp can be attached to your existing 1.5-inch or 2-inch wide fitness rope to make it suitable for rope climbing. Simply bolt the clasp onto one end of your power conditioning rope, and then affix the rope vertically to a ceiling anchor using the eyelet on the clasp. The heavy duty clasp will support up to 750 pounds!
Attach to training ropes horizontally for heavy-rope training movements such as waves, slams, throws, spirals, and whips. Attach to one end for securing to a weighted sled for hand-over-hand pulls, or to both ends to use as a rope tether from sled to vest for sled drags. The user may also attach a clasp at both ends of the rope and anchor horizontally to use for horizontal hanging-type movements and tightrope balance training.
- (1) Rope Clasp with rope attachment hardware (bolts and nuts)
- Can be utilized with 1.5” or 2” wide rope
- Max Weight Load: 750 lbs
- Weight: 3 lbs.
- 1-Year Manufacturer Warranty against defect
- Rope not included (sold separately)
Recommended Instructions for Attachment to Rope:
It is suggested that you pre-drill the holes at the end of the rope (through the protective end covering or “boot”) and then slide the bolts through and firmly secure the nuts on the outside end.
NOTE: The clasp itself can bear the weight of 750 pounds, but the actual weight load will also depend on what you have the clasp attached to. Please ensure that the entire attachment can manage the entire load (clasp, rope and weight of person) when considering attachment points for climbing.
Shipping cost included within the lower 48 states only
Ships via UPS
Item Number: BR-CLASP ProdID_20925
Product Name: Rope Clasp for Power Conditioning Ropes -- Valor Athletics (BR-CLASP)
Manufacturer: VALOR ATHLETICS
Manufacturer Part No: BR-CLASP