A-Frame Bumper Plate Tree -- Bomb Proof (BP-45)

52845 ProdID_3166
Out of stock
For Olympic Bumper Plates
Plates and Collars NOT Included

BOMB PROOF® A-Frame Bumper Plate Tree - The BP-45 American Made A-Frame Bumper Plate Tree by Bomb Proof is a space saving storage solution for school weight rooms and commercial gyms. What makes the BP-45 different than the BP-44 Olympic plate tree is that the plate storage pegs on the outside of the BP-45 are all spaced evenly to accommodate 45 and 55 lb. rubber bumper plates on either side on any level. This greatly expands the versatility of this tree and does not limit any one peg to a certain size or weight of plate. The BP-45 is fabricated from heavy-gauge steel including a 2 x 2 square tube base with bolt down tabs for additional stability if needed. The four 2 diameter outer weight pegs are chromed for extended finish durability and the frame and base of the tree are powder coated in your choice of gloss white, wrinkle black, platinum or tank style. The BP-45 A-frame is a stable storage solution with angled pegs that always keeps your plates secured on the rack without worry of wobbling or falling off.

Need help selecting the right Olympic Bumper Plate Tree for your garage or commercial gym? Contact an Ironcompany.com fitness equipment specialist today at 1-888-758-7527 or email quotes@ironcompany.com

Bumper Plate Tree Specs and Info:

  • Dimensions: 33 L x 28 W x 37 H
  • Design: Stable A-Frame design keeps bumper plates in place at all times without worry of falling off
  • Frame Construction: 2 x 2 x 11 gauge carbon steel base with up to 75% post consumer recycled material
  • Weight Pegs: 2 diameter x 8" long steel pegs are chromed for long lasting finish and aesthetics. Includes four outer pegs and two inner for smaller plates and collars
  • Weight Peg Spacing: All four outer pegs are spaced evenly to accommodate 17.7 diameter plates
  • Finish: Chip resistant powder coat is electrostatically applied and then baked on at 400 degrees
  • Fabrication: Combination mig-welded and bolt together frame for maximum strength and easy shipping
  • Color Availability: Your choice of powder coat color per the drop down menu above
  • Uses: Commercial facilities for storing Olympic rubber bumper plates
  • Unit Weight: 49 lbs.
  • Assembly: Some assembly may be required
  • Bolt Down Tabs: Included for bolting to concrete sub-floors for maximum stability and safety. It is recommended that all commercial strength equipment is bolted to floor
  • Government Purchase: Available for purchase through Ironcompany.com contracts GSA GS-07F-0104M and CMAS 4-12-78-0066A
  • Country of Origin: Proudly Made In The USA

New Bomb Proof® "Tank Style"
"Tank" Colored Frames / Desert Camo Upholstery


Institutional grade, all rubber end caps are on all horizontal base points to ensure a stable base and non-slip performance.

A minimum 2" thick, high density neoprene padding is manufactured to withstand repeated compression.

Lock collars are used to secure pads allowing an excellent grip and pad replacement when needed.

Only zinc coated bolts with "nylock" nuts are used. These nuts have a nylon core that grip extra tight.

Frames are 2" x 3" and 2" x 2" 11-gauge A-36 carbon steel tubing and .035 MIG welded and powder-coated.

3/8" hardened pop pins and threaded secure locks are used to ensure that the unit is safe and stable.

All pivot points have oil-impregnated brass bushings. The bushing is being continually lubricated to last.

BOMB PROOF® uses 29 oz. marine grade vinyl which resists mold and mildew and is backed by 100% polyester.

Shipping NOT Included
Due to the size and/or weight of this product, this item does not include shipping. If you place an order for this item the shipping cost will be emailed to you within 24 hours and will be an additional charge. We do our best to assure you the lowest possible shipping cost available. If you would like to obtain a quote for this product or multiple products before you order please email us at Quotes@ironcompany.com for a shipping quote request and include the product(s) Manufacturer, Name, and Part Number along with the ship to address. We do our best to assure the lowest shipping cost available.