Fractional Olympic Weight Plate Set - Steel - 0.25, 0.5, 0.75, 1.0 lb (Pairs) -- Ironcompany (5LBFP)

5LBFP ProdID_21398
In stock
4 pairs - Laser Cut Steel
Fractional Olympic Weight Plate Set - Steel - 0.25, 0.5, 0.75, 1.0 lb (Pairs) -- Ironcompany (5LBFP) is available to buy in increments of 1

IRON COMPANY® Steel Fractional Olympic Weight Plates Fractional Plates from IRON COMPANY are wafer thin, laser cut steel Olympic plates in micro-load pound increments for use during Olympic weightlifting, powerlifting, and technique training. Most gyms only offer Olympic plates as small as 2.5 pounds for incremental jumps in weight during training. With fractional plates, you can increase lifts by as little as one half pound, one pound, one and a half pounds, or two pounds. Those training for competition and increasing their personal best will value these fraction plates as record breakers. Competitive weightlifters and powerlifters, and other advocates of progression training, utilize the smallest fractional increments in weight to overcome plateaus and reach the next level in strength gains. Because they are so thin, steel fractional plates barely take up any room on a bar sleeve, leaving plenty of room for Olympic plates, rubber bumper plates, and Olympic weight collars. Ironcompany steel fraction plates are powder coated with a durable epoxy and polyester resin blend for durability and minimal wear, and come in four colors to easily identify weight increment. Fractional plates are a must for any crossfit box, strength club, sports training facility, or competition arena. And, at a diameter of just under 4 inches and a total weight of five pounds for the set, fractional change plates are a highly portable training tool for strength coaches, athletes, and serious lifters who like to keep their record breakers close.

Set Includes:

  • (2) 0.25 lb Steel Olympic Plates - Gray
  • (2) 0.5 lb Steel Olympic Plates - Blue
  • (2) 0.75 lb Steel Olympic Plates - Red
  • (2) 1.0 lb Steel Olympic Plates - Black

Features and Specifications:

  • One pair each size
  • Laser cut steel construction
  • Durable powder coated finish made of epoxy resin and polyester resin blend
  • Color coded and stamped with weight increment for quick reference
  • Compatible with Olympic bars
  • Inside hole diameter: 2 inches (50.8mm)
  • Outside plate diameter: 3-15/16 inches (10.0cm)
  • Plate thickness by weight increment:
    • 1 lb - 3/8" (9.5mm)
    • 3/4 lb - 1/4" (6.4mm)
    • 1/2 lb - 3/16" (4.8mm)
    • 1/4 lb - 3/64" (1.2mm)
  • Total set weight: 5 lbs

Looking to make a bulk purchase of weightlifting accessories for your fitness studio or commercial gym? Contact an fitness equipment specialist today at 1-888-758-7527 or email

Shipping Included
Shipping cost included within the lower 48 states only
Ships via UPS