Plate Loaded T-Bar Back Row Machine -- Bomb Proof (BP-28)

2 x 2 x 11 Gauge Steel
Three Grip Widths
Fully Welded

BOMB PROOF® Plate Loaded T-Bar Back Row Machine - The BP-28 American Made T-Bar Back Row Machine is built for commercial use and designed to target all areas of the latissimus dorsi muscles in the back. The T-Bar Rowing Machine is a popular alternative to bent over barbell rows and allows the user better balance, control and range of motion while adding size and strength to the back. Three gripping areas include narrow, medium and wide for targeting different areas of the lats and obtaining that sought after V-taper. 12 x 20 anti-skid diamond plate platforms ensure solid traction and performance even under the heaviest weight. And speaking of the heaviest weight, the chromed weight sleeve of the BP-28 includes 12 of loadable space so even the strongest weightlifters can pile on the weight plates. Whatever the resistance load, the fully welded 2 x 2 x 11 gauge steel frame performs flawlessly while demonstrating great stability. Select from several baked on powder coat finishes or ask an Ironcompany strength equipment professional about custom options to match your current machines. Plates NOT included.

Need help selecting the right Plate Loaded Lat Row Machine for your commercial gym or club? Contact an fitness equipment specialist today at 1-888-758-7527 or email

T-Bar Lat Row Machine Specs and Info:

  • Dimensions: 83 L x 33 W x 22 H
  • Frame Construction: 2 x 2 x 11 gauge carbon steel with up to 75% post consumer recycled material
  • Feet: Welded end caps and feet
  • Fabrication: Mig-welded one-piece frame for maximum strength and stability
  • Footplates: Dual 12 x 20 non-slip diamond plate footplates are set at a 5 degree angle
  • Handlebars: Three 1 diameter handlebar options include close, medium and wide for targeting multiple angles of the back. Foam rubber grips are included
  • Bushing: Upper and lower half of machine is connected by a 1 bushing
  • Weight Horn: Chromed weight horn include 12 of loadable space
  • Plate Compatibility: Use with 2 Olympic plates only. Plates NOT included
  • Finish: Chip resistant powder coat is electrostatically applied and then baked on at 400 degrees
  • Color Availability: Your choice of powder coat color per the drop down menu above
  • Bolt Down Tabs: It is recommended that all Bomb Proof equipment featuring bolt down tabs is securely bolted to floor for maximum safety
  • Uses: Commercial gyms and clubs
  • Assembly: Some assembly may be required
  • Unit Weight: 143 lbs.
  • Government Purchase: Available for purchase through contracts GSA GS-07F-0104M and CMAS 4-12-78-0066A
  • Country of Origin: Proudly Made In The USA


Institutional grade, all rubber end caps are on all horizontal base points to ensure a stable base and non-slip performance.

A minimum 2" thick, high density neoprene padding is manufactured to withstand repeated compression.

Lock collars are used to secure pads allowing an excellent grip and pad replacement when needed.

Only zinc coated bolts with "nylock" nuts are used. These nuts have a nylon core that grip extra tight.

Frames are 2" x 3" and 2" x 2" 11-gauge A-36 carbon steel tubing and .035 MIG welded and powder-coated.

3/8" hardened pop pins and threaded secure locks are used to ensure that the unit is safe and stable.

All pivot points have oil-impregnated brass bushings. The bushing is being continually lubricated to last.

BOMB PROOF® uses 29 oz. marine grade vinyl which resists mold and mildew and is backed by 100% polyester.

Shipping NOT Included
Due to the size and/or weight of this product, this item does not include shipping. If you place an order for this item the shipping cost will be emailed to you within 24 hours and will be an additional charge. We do our best to assure you the lowest possible shipping cost available. If you would like to obtain a quote for this product or multiple products before you order please email us at for a shipping quote request and include the product(s) Manufacturer, Name, and Part Number along with the ship to address. We do our best to assure the lowest shipping cost available.

Some Bomb Proof® pieces will arrive fully welded and in one piece. It is the customers responsibility to make sure the dimensions of each piece will allow it to be moved to the preferred location in your home or business. Any fully welded pieces can be built to bolt together upon request. This may require an upcharge. Please consult with a salesman if you have doubt before placing the order!

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!