5 lb. Steel Add-On Weight for Home Gyms and Commercial Selectorized Stack Machines – BodyCraft (AW-5)
BodyCraft 5 lb. Add-On Weight - The BodyCraft 5 lb. Add-On Weight is a cylindrical shaped add-on weight stack plate with an opening on one side which allows it to be placed over the cable that attaches to the weight stack selector stem, and then placed down onto the top plate. The Add-On Weight allows for small incremental increases of 5 lbs for BodyCraft weight stacks using standard 10 pound plate increments. For machines which use functional trainer arms or other pulley configuration creating a 2:1 resistance ratio, the Add-On Plate will offer half the weight resistance (2.5 lbs) to be added to standard 5 lb weight stack plate resistance increases. The BodyCraft Add-On Weight is machined from solid steel which is nearly impervious to damage when used over time or even dropped, unlike rubber add-on weights which can wear or be cut from cable friction, or even break in half when mishandled with force. The safe design of the cylinder weight is such that it needs to be lifted off the top screw of the selector stem and have the cable pass through the slot on the back side to be removed. And, when used specifically with select BodyCraft gyms, the Add-On Weight will interlock with the top plate so that it cannot slip, move around, or fall off during use.
- (1) Add-On Weight
- Built for both commercial and home use
- Allows for increase by 5 lb increments (or 2.5 lb increments for machines with 2:1 resistance ratio)
- Machined from solid steel
- Painted with a durable baked on powder coat finish
- Color Black
- Marked with weight increment in front for easy identification
- Interlocks with top stem plate on select BodyCraft gyms
- Compatible with BodyCraft Galena Pro, Xpress, X2, X4, GL, GLX, GXP, Elite, Jones Lat, F431 lat, Strata, M300, Mpress, Family XPress, GX, K1, K2
- NOT compatible with the BodyCraft HFT, PFT, Jones-LC Functional Cable Crossover, Jones Platinum Full Body Trainer, Mini XPress
- May be compatible with other brands of strength equipment
NOTE: While the BodyCraft Add-On Weight can be used with other brands of home gyms and selectorized weight machines, you will want to confirm that the space on the top plate of the selector stem between the guide rods is wide enough to accept the diameter of the Add-On Weight, and that the cable screw that inserts into the top plate has a diameter less than the inside hole diameter of the Add-On Weight. For selector stem top plates which have a pulley attached, the Body-Craft Add-On Weight will likely not be compatible.
- Weight: 5 pounds
- Outside diameter: 3 inches
- Inside diameter: 1.25 inches
- Height: 3 inches
Need additional cable gym accessories for your home gym or commercial selectorized gym machines? Contact an IRON COMPANY® strength equipment specialist today at 1-888-758-7527 or email firstname.lastname@example.org.
Shipping cost included within the lower 48 states only
Ships via UPS