Raptor P-1400 Butterfly Contractor/Pec Dec | ProMaxima (P-1400)

ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec | ProMaxima (P-1400)

Overview

The ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec is a selectorized pec dec machine designed for focused chest fly training in home gyms, training studios, and full commercial facilities. With a 225 lb. weight stack, adjustable start range, and ergonomically formed arms, this ProMaxima pectoral deck delivers smooth, controlled butterfly contractor machine exercises for a wide range of users.

Rated for residential, light commercial, and full commercial use, the Raptor P-1400 combines heavy-gauge steel construction, aircraft-grade cable, and commercial upholstery to provide reliable pec dec machine performance set after set.

• Use Rating: Residential / Light Commercial / Full Commercial
• Category: Selectorized butterfly contractor / pec dec machine
• Why it matters: Isolates the chest with a guided fly motion, helping users develop pectoral strength and shape without the balance demands of free weights.

Key Benefits

• Focused chest isolation: The butterfly contractor pec dec movement targets the pectoral muscles through a hugging motion, minimizing shoulder and triceps involvement.
• Selectorized 225 lb. stack: A 225 lb. solid-steel weight stack allows load adjustments in seconds, making the machine suitable for beginners and advanced lifters alike.
• Adjustable ROM indexing: Start-range limitation with numerical indexing (1–5) helps tailor the movement to each user’s shoulder mobility and comfort.
• Consistent biomechanics: Computer-designed cams and radial bearings provide smooth resistance throughout the fly path, supporting proper pec dec machine exercises.
• Comfortable support: ABS seat and back dishes, seamless marine-grade upholstery, and natural rubber handgrips keep users stable and comfortable under load.
• Commercial-grade durability: High Stress 3/16" ASTM A-500 structural steel, aircraft-grade cable, and solid-steel plates are built for daily use in busy facilities.
• Low maintenance: Fully shrouded weight stack, oil-impregnated cable, and sealed ball-bearing pulleys help reduce wear and simplify maintenance routines.
• Easy to coach: Bright red pull knobs, axis-of-rotation indicators, and an instructional placard make the ProMaxima P-1400 straightforward for staff to teach and supervise.

Description

The ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec is ideal for lifters and facilities that want a dedicated pectoral deck station with commercial feel and selectorized convenience. Users sit on the padded seat, press their forearms or hands against the pads or grips, and bring the arms together in front of the body in a controlled arc to contract the chest.

Like other Raptor selectorized machines, the P-1400 uses multiple adjustments to support proper biomechanical function for different body sizes. A five-position seat adjustment operated by heavy-duty spring-loaded colored pull-pin knobs allows users to align the shoulder joints with the axis of rotation. Start-range limitation with numerical indexing lets coaches and users set the initial arm position, helping protect shoulders while still allowing full-range work when appropriate.

The selectorized weight system uses solid-steel plates machined precisely within an ounce of their labeled weight. A tethered magnetic selector pin extends through the entire 225 lb. stack, enabling fast, secure weight selection. The system allows 5 lb. increment increases, making it easier to progress chest fly loading over time. The stack is accessible from a seated position and fully enclosed by form-fitted outer shields and full-length shrouds.

For resistance transfer, the ProMaxima butterfly contractor machine uses a cable system built from 1/4" thick, 4,800 lb test military-spec galvanized aircraft cable finished with a tough 3/16" nylon coating. Manual tension adjusters on the machine make it easier to maintain proper cable tension. Cables route through 4" and 6" solid fiberglass-reinforced pulley wheels with deep cable grooves and oil-dipped double-sealed racer ball bearings sealed for moisture and dust resistance.

The frame structure consists of High Stress 3/16" ASTM A-500 grade B structural steel tubing (11-gauge) in 2" x 4" and 2" x 3" sections on uprights, with 2" x 2" carbon steel tubing used on cross members and benches. Guide rods are 1" CCRO ANSI 1045 solid steel, hard chrome-plated with 75,000 psi tensile strength for precise, low-friction stack travel. All welds are ground down and stress tested for long-term safety and clean appearance.

Comfort and longevity are supported by heavy-duty 40 oz commercial marine Naugahyde upholstery (approximately 85% mildew resistant) over high-density closed-cell foam reinforced with thick plywood backing. ABS seat and back protective dishes guard the padding and frame from impact, while ergonomically formed natural rubber handgrips provide a secure feel through the full fly motion. Urethane foam grades HR-125 and HR-150 in high-compression zones help the pads maintain their shape under repeated use.

Each ProMaxima P-1400 pec dec machine is finished with a custom color powder coat after a three-stage pre-paint process that includes pellet blasting to purify the steel, preheating, and applying/baking magnetic powder for a hardened finish. The design exceeds applicable ASTM requirements for strength equipment, meeting the demands of commercial and institutional training facilities.

FAQs

What muscles does the ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec train?

The P-1400 pectoral deck targets the pectoral muscles through a fly or hugging motion and also engages the anterior deltoids and supporting shoulder musculature.

How heavy is the weight stack on the ProMaxima P-1400 pec dec machine?

The Raptor P-1400 is equipped with a 225 lb. selectorized weight stack made from solid-steel plates, with small 5 lb. increment changes available via the tethered magnetic selector pin.

Is the ProMaxima Raptor P-1400 suitable for full commercial gyms?

Yes. The ProMaxima P-1400 butterfly contractor machine is rated for residential, light commercial, and full commercial environments and is built from 11-gauge structural steel tubing, aircraft-grade cable, and commercial upholstery that exceed applicable ASTM strength equipment standards.

How does the ROM indexing work on the P-1400?

Start-range limitation with numerical indexing (1–5) allows users and operators to choose the starting position of the arms, enabling partial or full-range pec dec machine exercises based on shoulder comfort and training goals.

How does the machine adjust for users of different heights?

The machine features a five-position seat adjustment using heavy-duty spring-loaded pull pins. Setting the correct seat height helps align the shoulders with the axis of rotation for efficient chest fly mechanics.

What maintenance is recommended for the Raptor P-1400 pec dec machine?

Maintenance includes inspecting cables and pulleys for wear, checking cable tension, verifying smooth operation of selector pins and ROM adjustments, tightening hardware as needed, and wiping down upholstery and frame surfaces. Replace worn parts with factory-approved components.

Can beginners safely use the ProMaxima Raptor P-1400?

Yes, when beginners receive basic instruction on seat height, ROM adjustment, and proper fly technique. The guided motion, ROM indexing, and instructional placard help new users perform chest pec deck machine exercises with controlled form and light starting loads.

Is the warranty on the ProMaxima Raptor P-1400 transferable?

No. The warranty for the ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec is non-transferable and applies only to the original purchaser. Subsequent owners are not covered under the factory warranty.

Ready to add the ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec machine to your chest-training lineup? Add to cart or request a quote. Need help comparing pec dec machines for your facility? Contact IRON COMPANY.

Support

Questions about the ProMaxima Raptor P-1400 Butterfly Contractor/Pec Dec or other selectorized gym equipment? Call 888-758-7527 or visit Customer Support.