Moxie Beast Colored Wood Grain Embossed Rubber Flooring Rolls | Ecore (MOXIE-BEAST)

• Moxie rolls may be installed over concrete, Portland-based patching and leveling materials, and wood.
• Subfloors shall be dry, clean, smooth, level, and structurally sound. They should be free of dust, solvent, paint, wax, oil, grease, asphalt, sealers, curing and hardening compounds, alkaline salts, old adhesive residue, and other extraneous materials, according to ASTM F710.
• Subfloors should be smooth to prevent irregularities, roughness, or other defects from telegraphing through the new flooring. The surface should be flat to the equivalent of 3/16in (4.8 mm) in 10ft (3.0 m).

Cleaning Recommendations: 

• Ecore recommends our environmentally friendly line of maintenance products, including E-Cleaner.
• Initial Cleaning: 10 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low- speed scrubber or auto scrubber.
• Daily Cleaning: 2-4 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low- speed scrubber or auto scrubber.
• Heavy Soil & Restorative Cleaning: 10 oz. / gal water 16 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low-speed scrubber or auto scrubber.

Moxie Beast dials up the energy restitution for strength environments. It's capable of withstanding static loads, like cardio and selectorized strength machines and can also withstand weight drops.

• Flooring Type: Rolled rubber. 
• Roll Dimension: 10.5mm x 4' x 30'
• Sq. Ft. Per Roll: 120 sq. ft.
• Surface Layer: 2.5mm Calendered Rubber Surface Layer
• itsTRU Fusion Bond: Proprietary itsTRU™ technology fusion-bonds the layers.
• Base Layer: 8mm VCR Factory Fusion-Bonded Beast Base Layer
• Roll Standard Tolerances: Thickness: ± 0.8 mm | Width: +3/4” - 0” | Length: +1% - 0”
• Slip Resistance / Coef. of Friction: (ASTM D-2047) >0.8
• Impact/Energy Abatement: 17.8%
• Energy Restitution: 59%
• Static Load Limit @ 250 psi: (ASTM F-970) 0.007"
• Impact Insulation Class (IIC): (ASTM E-492) 55
• Vertical Deformation: 1.4mm.
• g-max: 262
• Flammability: (ASTM D2859) Pass.
• VOC Compliant: (ASTM D5116) Pass. 
• Weight Per Sq. Ft.: 2.3 lbs. per sq. ft.
• Weight Per Roll: 276 lbs.
• Installation: Adhesive
• Leed Points: Yes
• Use: Indoor use only. 
• Colors: Actual color may vary from on-screen representation and samples. Please contact your IRON COMPANY sales rep for additional information.
• Country Of Origin: USA
• Minimum Order: One roll or 30 linear feet total.

All Moxie rubber flooring is guaranteed by Ecore to be free from manufacturing defects on both material and workmanship. If such a defect is discovered, the customer must notify Ecore either through the contracting installer, distributor, or directly. If found to be defective under normal non- abusive conditions, at the discretion of Ecore, the sole remedy against the seller will be to repair, to replace, or to issue a credit not exceeding the selling price of the defective goods. These warranties only apply to the original purchaser.

Please see the Ecore Warranty Guide for length specifics.

This warranty shall not cover dissatisfaction due to improper installation, damage from improper maintenance or usage, or general misuse, including and without limitation: burns, cuts, tears, scratches, scuffs, damage from rolling loads, damage from cleaning products not recommended by Ecore, slight shade variations or shade variations due to exposure to direct sunlight, or differences in color between samples or photographs and actual flooring.