Moxie Motivate Plus Wood Grain Rolled Rubber Gym Flooring | Ecore (MOXIE-MOTIVATE)

• Moxie rolls may be installed over concrete, Portland-based patching and leveling materials, and wood.
• Subfloors shall be dry, clean, smooth, level, and structurally sound. They should be free of dust, solvent, paint, wax, oil, grease, asphalt, sealers, curing and hardening compounds, alkaline salts, old adhesive residue, and other extraneous materials, according to ASTM F710.
• Subfloors should be smooth to prevent irregularities, roughness, or other defects from telegraphing through the new flooring. The surface should be flat to the equivalent of 3/16in (4.8 mm) in 10ft (3.0 m).

Cleaning Recommendations: 

• Ecore recommends our environmentally friendly line of maintenance products, including E-Cleaner.
• Initial Cleaning: 10 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low- speed scrubber or auto scrubber.
• Daily Cleaning: 2-4 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low- speed scrubber or auto scrubber.
• Heavy Soil & Restorative Cleaning: 10 oz. / gal water 16 oz./gal. water. Microfiber mop or Soft Nylon Brush on a low-speed scrubber or auto scrubber.

Moxie Motivate Plus is our most universal option to date. It brings a new level of comfort and safety to fitness, health and wellness, and corporate spaces.

• Flooring Type: Rolled rubber. 
• Roll Dimension: 10.5mm thick x 4' x 30'
• Sq. Ft. Per Roll: 120 sq. ft.
• 2.5mm Calendered Rubber Surface Layer: A non-porous and durable surface that features an on-trend visual with organic color variation and a wood grain emboss that increases the durability and slip resistance of the surface.
• Base Layer: 8mm Vulcanized Composition Rubber functional base layer.
• Roll Standard Tolerances: Thickness: ± 0.8 mm | Width: +3/4” - 0” | Length: +1% - 0”
• Coefficient of Friction: (ASTM D-2047) >0.8
• Surface Effect Slip Resistance: (ASTM F2772) Pass
• Impact/Energy Abatement: 23.6%
• Force Reduction: 23.6%
• Energy Restitution: 52.5%
• Static Load Limit @ 250 psi: (ASTM F-970) 0.009"
• Impact Insulation Class (IIC): (ASTM E-492) 59
• Vertical Deformation: (ASTM F2772) 1.9mm
• Vertical Ball Rebound: (ASTM F2772) Pass
• g-max: 182
• Flammability: (ASTM D2859) Pass
• VOC Compliant: (CA 01350) Pass
• Weight Per Sq. Ft.: 1.9 lbs. per sq. ft.
• Weight Per Roll: 228 lbs.
• Installation: Adhesive
• Leed Points: Yes
• Use: Indoor use only. 
• Colors: Actual color may vary from on-screen representation and samples. Please contact your IRON COMPANY sales rep for additional information.
• Country Of Origin: USA
• Minimum Order: One roll or 30 linear feet total.
• Available for government and military open market purchases via GSA contract 47QSMA22D08NN.

All Moxie rubber flooring is guaranteed by Ecore to be free from manufacturing defects on both material and workmanship. If such a defect is discovered, the customer must notify Ecore either through the contracting installer, distributor, or directly. If found to be defective under normal non- abusive conditions, at the discretion of Ecore, the sole remedy against the seller will be to repair, to replace, or to issue a credit not exceeding the selling price of the defective goods. These warranties only apply to the original purchaser.

Please see the Ecore Warranty Guide for length specifics.

This warranty shall not cover dissatisfaction due to improper installation, damage from improper maintenance or usage, or general misuse, including and without limitation: burns, cuts, tears, scratches, scuffs, damage from rolling loads, damage from cleaning products not recommended by Ecore, slight shade variations or shade variations due to exposure to direct sunlight, or differences in color between samples or photographs and actual flooring.