GLUTE DRIVE Plate Loaded Hip Thrust Machine | COREHF (GLUTE-DRIVE)
The Throwdown Glute Drive is a commercial-rated, plate-loaded hip thrust machine with full-length back... Read More
Available
Shipping Included
Description
Features
Reviews
Specifications
Warranty
Shipping
Attachments
The Throwdown Glute Drive is a plate-loaded hip thrust machine designed to give home and commercial gyms a dedicated station for glute and hip-extension training. An articulating upper-body pad supports the full length of the spine, while a reinforced waist harness, oversized angled foot platform, dual-sided release, 360 lb. plate capacity, and integrated band pegs create a repeatable setup without tying up a barbell and bench.
Reviewed and curated by J.P. Brice – President & CEO.
Throwdown Glute Drive Plate Loaded Hip Thrust Machine
The Glute Drive turns the hip thrust into a dedicated machine-based exercise rather than a temporary setup assembled from a bench, Olympic bar, plates, and bar pad. The user enters the station, secures the reinforced padded waist harness, positions the feet on the oversized angled platform, and performs the hip-bridge movement against a plate-loaded carriage designed to promote consistent biomechanics and a balanced resistance curve.
Key Benefits
- Dedicated hip thrust station: Keeps glute and hip-extension training contained within one machine instead of occupying a separate bench and Olympic bar.
- Full-length upper-body support: The articulating upper-body pivot pad supports the length of the spine while the hips move through the exercise.
- Reinforced padded waist harness: Secures the user to the machine without placing an Olympic bar directly across the upper thighs.
- Oversized angled foot platform: Provides room for varied foot placement and accommodates a broad range of users.
- 360 lb plate-load capacity: Accepts up to four 45 lb. Olympic plates on each side for a total stated plate load of 360 lbs.
- Integrated resistance band pegs: Allow resistance bands to modify the load curve when a different resistance profile is desired.
- Safety-focused controls: Includes a dual-sided catch-and-release mechanism and a bottom dropout safety stop.
- Optional rear plate storage: An available storage rack adds divided horizontal slots for Olympic plates and bumper plates.
Pro Tips from the Floor
- The machine itself occupies approximately 25.8 sq. ft. based on its 62" x 60" dimensions. Leave additional working room on both sides for loading plates and behind the unit when ordering the optional storage rack.
- Reaching the full 360 lb. plate load requires eight 45 lb. Olympic plates—four per side. Weight plates, resistance bands, and collars are sold separately, so include them when budgeting a complete training station.
- Plan the delivery before the truck arrives. The Glute Drive ships in a 305 lb. palletized carton, while the machine and optional storage rack ship at a listed combined weight of 346 lbs. Freight delivery is curbside.
A traditional barbell hip thrust requires the exerciser to position a loaded Olympic bar across the upper thigh area, use padding to manage contact pressure, maneuver beneath the bar, and control the bar throughout the set. That arrangement also occupies a bench, bar, plates, and a larger temporary work area. The Glute Drive replaces those individual components with a dedicated pivot bench, padded harness, foot platform, plate-loaded carriage, and built-in control points.
The articulating back pad and pivoting upper-body bench are designed to support the user throughout the hip-bridge motion. The reinforced waist harness keeps the body connected to the machine, while the oversized angled platform gives the user room to establish foot position before beginning the set. Dual-sided release controls make the mechanism accessible from either side, and the bottom dropout stop provides an additional control point at the lower end of the movement.
Resistance is supplied through Olympic weight plates with 2" center holes. The stated maximum plate load is 360 lbs., equal to four 45 lb. plates on each side. Integrated band pegs provide another way to alter the resistance curve, but that band tension does not increase the machine’s rated plate capacity. Olympic plates, resistance bands, and weight collars must be purchased separately.
Commercial-grade dual pivot bearings support the machine’s moving structure. The frame uses industrial-grade steel with a 3mm wall thickness, while Delrin-coated protective surfaces are positioned at high-contact and load points to help manage wear. These construction details make the Glute Drive suitable for residential, light commercial, and full commercial strength-training environments under the supplied warranty classifications.
The assembled machine measures 62" L x 60" W x 35" H. Those dimensions describe the equipment itself, not the full working area. Buyers should also account for user entry, side access to the plate horns, movement around the foot platform, and rear access when the optional storage rack is installed. The rack attaches to the rear of the machine and provides divided horizontal storage for both Olympic weight plates and bumper plates.
The optional rack is particularly useful when the Glute Drive is being installed away from an existing weight plate storage rack. Facilities already using centralized plate trees may prefer the machine without the rack, while high-traffic gyms may benefit from keeping the required plates immediately beside the station. The rack is optional and should not be treated as a standard included component.
Buyers comparing glute trainers for home and commercial gyms should choose the Glute Drive when a dedicated plate-loaded hip thrust movement is the priority. Facilities building a wider posterior-chain area can also compare back, hamstring, and glute benches or browse other plate-loaded leverage equipment.
For a complete station, pair the machine with compatible Olympic weight plates and other strength training equipment. The warranty provides separate terms for full commercial facilities, light commercial facilities, and residential installations, making the use classification an important part of the purchase decision.
Frequently Asked Questions
What exercise is the COREHF Glute Drive designed for?
It is a dedicated plate-loaded hip thrust machine for glute and hip-extension training using a supported hip-bridge movement.
How is this different from a barbell hip thrust?
The Glute Drive uses an articulating upper-body pad, padded waist harness, oversized foot platform, and plate-loaded carriage. It eliminates the need to assemble a separate bench, Olympic bar, bar pad, and temporary lifting area for each hip thrust session.
What is the maximum plate load?
The stated maximum load is 360 lbs., or up to four 45 lb. Olympic plates on each side.
What weight plates fit the machine?
The loading horns are compatible with Olympic weight plates that have a 2" center hole.
Can resistance bands be used?
Yes. The machine includes integrated resistance band pegs for modifying the resistance curve. Resistance bands are sold separately.
What are the assembled dimensions?
The assembled Glute Drive measures 62" long x 60" wide x 35" high, or approximately 157.5 x 152.5 x 89 cm.
Is plate storage included?
No standard plate storage is included. An optional rear rack is available with divided horizontal slots for Olympic weight plates and bumper plates.
Are weight plates, resistance bands, and collars included?
No. Weight plates, resistance bands, and weight collars are sold separately.
